Printing & Finishing FAQ

Stapling, punching, and binding (depending on your machine’s installed options).

Yes, with user authentication. This helps manage costs by controlling who can print.

Enter your username and password in the printer driver before printing. This is done under the print driver BASIC TAB select user authentication and enter credentials once and apply.

Yes, if equipped with the optional Wireless LAN Interface Kit (may require firmware update).

Yes. Insert your USB into the machine’s USB port to print. This option is enabled by default, if this is not the case a Konica Minolta service representative can assist telephonically with an administrator.

Yes, by setting it as the initial value in the printer driver.
Tip: Set both “Black & White” and “2-Sided” as defaults to save toner and paper.

Yes, load it into Tray 1, Tray 2, or the Bypass Tray, then select the correct tray when printing. On the Print screen, specify the tray containing custom size paper; this will enable you to print on custom size paper.